5000Nm 10000rpm 0.2F.S SLZN-5000 Shaft Type Static Torque Sensor For Testing
Product introduction
SLZN-5000 torque and speed sensor uses high-quality bearings for high-speed continuous operation and a precision encoder for measuring the Angle of rotation. In addition to the detection of torque speed, it is characterized by the ability to measure the rotation Angle of the sensor shaft. The sensor is manufactured to ensure a certain accuracy, and the appropriate reading components can be combined to achieve a higher accuracy. In addition, this series of sensors compact structure, high reliability, strong stability. Therefore, it has been widely used in space technology, NUMERICAL control mechanical system and so on.
Speed measurement is divided into:
1. The photoelectric and code disk principle is used in high speed measurement.
2. When measuring angle, displacement and low speed, the incremental encoder principle is used to design, which has high accuracy, stable and reliable performance and long service life.
Specifications (Can be customized)
| Model | Torque(Nm) | Max.Torque(Nm) | Rated Speed(rpm) | Speed Measurement Accuracy | Torque Measurement Accuracy |
| SLZN5000 | 5000 | 7500 | 5000 | 1/60rpm | 0.2%FS |
| SLZN10000 | 10000 | 15000 | 5000 | 1/60rpm | 0.2%FS |
| Can be customized | | | | |
Outside view
Technical parameters:
- Power supply: ± 12VDC, current > 0.3A
- Application environment: temperature: - 20 ℃ - 50 ℃ Humidity: ≤ 90% RH Atmospheric pressure: 90-106kpa
- Overload capacity: 150% F.S
- Inaccuracy: 0.1% F.S
- Repeatability: 0.1% F.S
- Linearity: 0.1% F.S
- Lag: 0.1% F.S
- Analog signal output: zero torque: 10kHz
- Forward full scale: 15KHz
- Reverse full scale: 5KHz
- Speed measuring gear: 60, 120, 600 or 1024 pulses per circle.
- Digital bus interface: RS232 or RS485
Function Description
- The performance and installation dimension of the product are fully compatible with the corresponding sensors of SLNJ-Z series, and the user does not need to change too much design to replace the product.
- Data sampling time can be as fast as 1 ms, and can be set between 1-1000 MS as needed.
- Using advanced measurement algorithm, the measurement error of data signal can be reduced to ± 1Hz.
- Through the digital bus interface signal, the measured value of torque and speed is directly transmitted to the computer and other network control equipment.
- The bus data communication has CRC data verification function, and the reliability of data transmission is high.
- The measured parameters can be remotely modified by computer and other control equipment, and the parameters can be completely saved after power failure.
- It has a variety of intelligent functions, such as overload alarm, fault detection, status indication, etc.
- Long distance data transmission can be realized through digital bus interface.
- The function can be upgraded continuously without other hardware cost.
FAQ
Q:What’s the minimum order quantity for our cooperation?
A: We support small trail order of 1 pcs for stock products.
Q: How can I learn more about the products?
A: Please leave your email and we will send you your electronic sample book.
Q: What’s your payment term?
A: Normally 30% T/T deposit, pay in full before shipment.
Q:What’s the lead time for my orders?
A: Dynamometers production cycle is 6-8 weeks, sensors prodction cycle is 2-3 weeks, other products please contact with us.
Q: How do we get the overall solution of the test bench?
A: Leave us your email, our technical staff will communicate with you about the detailed plan.
Q:Can I come to visit your factory?
A: Sure, you are always welcome to have a visit.
About Us
SeeLong Intelligent Technology (Luoyang Henan) Co., LTD., is a professional production of automotive power system test equipment high technology services enterprises. SeeLong is located in the Peony City(famous for peonies) -- Luoyang, which is also the ancient capital of 13 dynasties.
Why Choose Us
After years of development and accumulation, the company has become a well-known powertrain test equipment production enterprises. Specializing in engine test, transmission test, energy storage test, controls and electric motor test and other test equipment research, development and production service. The company has established long-term cooperation with tsinghua university, Shandong university and many other domestic scientific institutions. We have successfully passed the ISO9001 Quality System certification, obtained a dozen of invention patents and two software copyrights. We have provided professional services and equipment for more than 100 users at home and abroad and which is ongoing now and will continue in the future.
Prospect of cooperation
Friendly cooperation provides you both high quality products and long-term professional after-sales service.
Product Tags:
|
|
5000Nm 10000rpm 0.2F.S SLZN-5000 Shaft Type Static Torque Sensor For Testing Images
|
