200kW ±0.15%FS 8000RPM Full Automatic Control Gasoline Engine Dynamometer Test Bench System
Product Specifications
| Attribute |
Value |
| Rated Power |
200kW |
| Rated Torque |
637Nm |
| Max Speed |
8000rpm |
| Rated speed |
3000rpm |
| Torque Measurement Accuracy |
±0.15%FS |
| Overload capacity |
120% |
| Service temperature |
-40 to 60℃ |
| Use altitude |
<2000m |
| Rated frequency |
50Hz |
| Speed Measurement Accuracy |
±1rpm |
Product Overview
The 200kW gasoline engine dynamometer test bench system is an advanced testing platform designed specifically for high-power gasoline engines. By simulating a variety of complex operating conditions, the system accurately evaluates engine performance under various load and speed conditions.
Factory Installation Requirements
| Parameter |
Value |
Parameter |
Value |
| Altitude |
Less than 1000 meters |
Factory humidity |
≤ 80% |
| Foundation thickness |
＞180mm |
Factory temperature |
5 °C～40°C |
| Factory floor bearing capacity |
3t/㎡ |
Power supply |
380V ± 10 % three-phase 50Hz |
Compliance Standards
The 200kW gasoline engine test bench system strictly adheres to relevant national and industry standards, fully complying with the two core standards:
- GB/T 18297-2024 - Performance test code for road vehicle engines
- GB/T 19055-2024 - Reliability test methods for motor vehicle engines
System Components
- Electric dynamometer and high-precision torque sensor - Engine loading/dragging device with German HBM T40B series torque flange
- ABB ACS880 series variable frequency inverter system - Controls electric dynamometer for forward loading and reverse drag
- XLE-1000 measurement and control system - Overall control of test bench with automated test process
- Data acquisition system - Collects temperature, pressure and other parameters
- Dynamic throttle adjustment system - Ensures precise throttle control
- Coolant temperature control device - Maintains stable engine operation
- Fuel boost and pressure regulating device - Ensures stable fuel pressure supply
Technical Parameters
| Parameter Category |
Technical Indicators |
| Rated power |
200kW |
| Rated torque |
637Nm |
| Constant torque operating range |
0-3000rpm |
| Constant speed operating range |
3000-8000rpm |
| Torque measurement range |
0-637Nm |
| Torque measurement accuracy |
±0.15%FS |
| Dynamic response speed |
≤80ms |
| Energy recovery efficiency |
≥97% |
| Operating voltage |
AC 380V±10% |
| Operating frequency |
50Hz |
Core Advantages
- Cross-industry adaptability: Applicable to engine testing in multiple fields such as automobiles and ships
- Precision simulation and real-time data acquisition: Simulates complex working conditions with simultaneous parameter collection
- High degree of integration and automation: Intelligent control system with fully automated testing process
Product Models
| Model |
Power (KW) |
Torque (Nm) |
Rated Speed (rpm) |
Max Speed (rpm) |
Torque Measurement Accuracy |
| SSCG30-3000/10000 |
30 |
95 |
3000 |
10000 |
0.2%FS |
| SSCG45-3000/10000 |
45 |
143 |
3000 |
10000 |
0.2%FS |
| SSCG60-3000/10000 |
60 |
191 |
3000 |
10000 |
0.2%FS |
| SSCG90-3000/10000 |
90 |
286 |
3000 |
10000 |
0.2%FS |
| SSCG110-3000/10000 |
110 |
350 |
3000 |
10000 |
0.2%FS |
| SSCG160-3000/10000 |
160 |
509 |
3000 |
10000 |
0.2%FS |
| SSCG200-3000/8000 |
200 |
637 |
3000 |
8000 |
0.2%FS |
| SSCG250-3000/8000 |
250 |
796 |
3000 |
8000 |
0.2%FS |
| SSCG300-3000/7500 |
300 |
955 |
3000 |
7500 |
0.2%FS |
| SSCG350-3000/7500 |
350 |
1114 |
3000 |
7500 |
0.2%FS |
| SSCG400-3000/7500 |
400 |
1273 |
3000 |
7500 |
0.2%FS |
Custom models available
Application Areas
- Automotive powertrain R&D: Testing engine's extreme performance during new model development
- General power generation equipment manufacturing: Full-load and overload performance testing of generator sets
- Engineering Machinery Power Testing: Simulating special environmental conditions for off-road vehicles and agricultural machinery
- Experimental research in scientific research institutions: Providing standardized testing environment for engine energy-saving technology research
Trade Show
From October 24th to 26th, 2024, the Russian International Testing and Control Exhibition was successfully held at the Moscow Klokus International Convention and Exhibition Center.
Seelong Intelligent Technology (Luoyang) Co., Ltd. was invited to participate in the exhibition, focusing on displaying its main products such as engine test benches and transmission test benches to the Russian market.
Company Profile
Seelong Intelligent Technology (Luoyang) Co., Ltd. is a high-tech enterprise specializing in equipment measurement, control, design, manufacturing, and sales services for power engineering systems in various fields such as aerospace, automotive, and new energy.
Seelong specializes in the research and development, production, and service of testing equipment for new energy motors, hybrid power systems, engines, transmissions, and more. Our main products include electric dynamometers, measurement and control systems, DC power supplies, and working condition guarantee systems.
Packaging and Shipping
Frequently Asked Questions
Q: What's the minimum order quantity for our cooperation?
A: We support small trail order of 1 pcs for stock products.
Q: How can I learn more about the products?
A: Please leave your email and we will send you your electronic sample book.
Q: What's your payment term?
A: Normally 40% T/T deposit, pay in full before shipment.
Q: What's the lead time for my orders?
A: Dynamometers production cycle is 6-8 weeks, sensors production cycle is 2-3 weeks, other products please contact with us.
Q: How do we get the overall solution of the test bench?
A: Leave us your email, our technical staff will communicate with you about the detailed plan.
Q: Can I come to visit your factory?
A: Sure, you are always welcomed to have a visit.
